Top watches

FitPro Smart Watch Charger: Pin Types, Charging Steps and Battery Life

Most FitPro-style watches charge from a magnetic 2-pin cable that snaps onto two gold dots on the back. Match the gap between those dots, charge for about two hours, and a typical calling watch runs 5 to 7 days before the next top-up.

Sales checked September 2026
Quick answer

Measure the centre-to-centre gap between the two charging dots on the back of the watch: 2.84mm, 4mm, 2.5mm and 7.62mm are the common sizes. Buy a 2-pin magnetic cable with that pitch, plug it into any USB port, and expect a full charge in roughly 1.5 to 3.5 hours depending on battery size.

  • No charge? Clean the dots and try the magnets the other way round
  • Band with a built-in USB plug? It needs no cable at all
  • Batteries are sealed; a worn one means a new watch, not a swap

Measure the pin gap before buying a spare charger

Every magnetic charger in this family has two spring-loaded pins, and the only size that matters is the distance between their centres. Get that pitch right and the cable snaps on and charges; get it wrong and the magnets grab while nothing happens.

A ruler with millimetre marks is enough. Measure from the middle of one gold dot on the back of the watch to the middle of the other.

  • About 2.8mm: the 2.84mm standard used by VeryFit IDW watches, ID205L-style watches and FitCloudPro models.
  • About 4mm: Da Fit-style and GloryFit T-series watches; universal 4mm cables accept 3.8 to 4.2mm.
  • About 2.5mm: small 1.4-inch watches and some slim bands.
  • About 7.6mm: kids' watches, some trackers and smart glasses.

Some bands skip the cable entirely. The ZURURU Y39 has a USB plug built into the tracker body: slide the band off and push the tracker into any USB port.

The number of pins matters as much as the gap. A dock with four pins will not charge a two-dot watch, even if the magnets line up.

Keep the old cable as a reference if it still works, and label a spare with its pitch so it never gets mixed up with a partner's cable. Straps share a quick-release width the way chargers share a pitch; the band sizing routine covers both for the gym bag.

Stats sheet

Match the pin pitch to your watch

Pin pitchWatches and apps named for itCable in the line-up
2.84mm (also sold as 2.8mm)VeryFit IDW13, IDW15, IDW19, IDW20, IDW25, IDW26, IDW28; ID205L, ID208, GTX20; Letsfit, Willful, YAMAYAcediar 2-pack; FitCloudPro A+B pack
4mm (3.8 to 4.2mm)Da Fit-style watches; GloryFit T50, T60, T70, T80, P98, P99Aliwisdom universal cable; Vancle GloryFit pack
2.5mmPopglory P22, AGPTEK LW31, Iaret i18, MorePro HM08, Parsonver SPROD1Parsonver 2-pack
7.62mmKids' watches, some trackers, smart glassesVanjua 2-pack
Built-in USB plugZURURU Y39 and similar plug-in bandsNo cable needed

Pitch is the distance between the centres of the two charging contacts, as each cable maker states it. Measure your own watch before ordering.

Charge it right: two hours on a USB port

A full charge takes about two hours on most of these watches, and the routine is the same whichever cable you use. Tie it to a daily habit, such as the morning shower, and the watch is never flat at bedtime when sleep tracking starts.

  1. Wipe the two dots on the back with a dry cloth; sweat film is the top cause of a slow or failed charge.
  2. Connect the USB side to a laptop port, a phone adapter or a power bank.
  3. Bring the magnetic head close; it should snap into place by itself.
  4. Check the screen for a battery or lightning icon within a few seconds.
  5. Leave it until the icon shows full, then unplug.
Battery sizeStated full chargeExamples
230mAhAbout 2 hoursKIPTUMTEK T7, MFVLP A7
300 to 350mAh1.5 to 2.5 hoursID208 Plus, Blackview R50 Pro
1000mAh2.5 to 3.5 hoursSWGOTA 1.85-inch, Tiksounds 1.83-inch

A plain 5V USB port is all these watches need. Fast phone chargers raise their output only for devices that ask for it, so they fall back to standard USB power for a watch.

Dry the watch fully after a swim or shower before charging. Water on the contacts combined with current speeds up corrosion on the pins.

Charging from a laptop is fine too, as long as the port stays powered. Some laptops cut USB power when the lid closes, which can leave the watch half-charged by morning.

Head to head

Battery claims, watch against watch

TRAUSI TG08 Calling Smart Watch TRAUSI TG08 Calling Smart Watch KIPTUMTEK T7 Calling Smart Watch KIPTUMTEK T7 Calling Smart Watch Yoever IDW20 Alexa Smart Watch Yoever IDW20 Alexa Smart Watch Tiksounds 1.83-inch Calling Smart Watch Tiksounds 1.83-inch Calling Smart Watch SWGOTA 1.85-inch Smart Watch SWGOTA 1.85-inch Smart Watch USMECBL 1.47-inch Fitness Tracker USMECBL 1.47-inch Fitness Tracker
TypeSmart watchSmart watchSmart watchSmart watchSmart watchFitness tracker
Screen1.83"1.83"1.91"1.83"1.85"1.47"
ShapeSquareSquareSquareSquareRoundSquare
Bluetooth callsYesYesYesYesYes—
WaterIP67IP67IP68IP68IP68IP68
BatteryUp to 7 daysUp to 10 daysUp to 30 daysUp to 20 daysUp to 30 daysUp to 14 days
TracksHeart rate · sleepHeart rate · SpO2 · sleepHeart rate · SpO2 · sleepHeart rate · sleepHeart rate · sleepHeart rate · SpO2 · sleep
App———FitCloudProFitCloudPro—
Strap it on Strap it on Strap it on Strap it on Strap it on Strap it on
Spec sheet

Full specs of the podium three

2-Pin 2.84mm Magnetic Charging Cable
2-Pin 2.84mm Magnetic Charging Cable
Connector
2-pin magnetic
Pin pitch
2.84mm (0.11 in), centre to centre
Cable length
3.3 ft / 1 m on most versions
Plug
USB-A; some packs include a USB-C cable
Pack sizes
Single cable or 2-pack
Power source
Any USB port, power bank or adapter
Recommended adapter
5V 1A
Charge time
About 2-2.5 hours for an ID205L-class watch
Protection
Over-voltage and over-current; short-circuit on some versions
Contacts
Copper probes, gold-plated on some versions
Materials
ABS and PVC with copper wire
Bend rating
5,000+ bends on some versions
Coach's notes →Strap it on
2-Pin 4mm Universal Magnetic Charging Cable
2-Pin 4mm Universal Magnetic Charging Cable
Model
Aliwisdom 2P-4mm
Pins
2
Pin pitch
4mm centre to centre
Fits contact spacing
3.8–4.2mm (4mm ±0.2mm)
Connection
Magnetic, upgraded pure-copper probes
Plug
USB-A on every version
Output
5V DC, 1A, 5W
Full charge
About 2 hours
Protection
Over-voltage and over-current; short-circuit protection on some versions
Housing
PC + ABS
Cable
Flexible PVC, 5000+ bend tested
Cable length
60cm (2-pack versions)
Coach's notes →Strap it on
2-Pin 2.5mm Magnetic Charging Cable
2-Pin 2.5mm Magnetic Charging Cable
Model
Parsonver SCW25
Connector
2-pin magnetic charging head
Pin spacing
2.5mm (0.098in), measured centre to centre
Plug
USB Type-A
Cables in the pack
2
Housing material
ABS and PVC
Contact pins
Gold-plated copper core
Safety
Built-in over-current and over-voltage protection
Attachment
Magnetic, self-aligning
Named watches
Parsonver SPROD1 (SR1), LW45, LW77, AGPTEK LW31, Popglory P22, CanMixs P2
More named watches
Kalinco P22, Donerton P22 (1.4-inch), GRV ZOSKVEE N29, LUOBA TOZDTO i13, Iaret i18
Also named
WZWNEER DXPICR Y20GT, Wwzzey P42B, Ypaddbu P58, Mingtawn Mingwear H76, Nemheng I22, Pupuskyer P25
Coach's notes →Strap it on

Revive a watch that won't charge

A watch that won't take a charge is seldom finished. Work down this list in order, from the free fixes to the one that costs a new cable, and most watches wake up before the last step.

  1. Clean the contacts. Rub the dots with a cotton bud and a drop of isopropyl alcohol, then let them dry.
  2. Swap the power source. A wall adapter rules out a sleeping laptop port.
  3. Flip the polarity. Some watches wire their contacts the opposite way. Universal 4mm cables have removable magnets that can trade places, and FitCloudPro packs ship with an A and a B cable for the same reason.
  4. Give it time. A deeply drained battery can take up to half an hour before the charging icon appears.
  5. Try a second cable of the same pitch. Cables often break inside the head long before the watch fails.

If the screen still stays dark after an hour on a known-good cable, the problem sits inside the watch.

  • Crusty green or white deposits on the dots points to corrosion from sweat or pool water.
  • A watch that charges only while you press the cable down has a weak pin or a tired magnet.
  • A watch that shows full but dies within hours has a worn battery.

The white-screen and no-power fixes pick up from here, including the restart that clears a frozen display. Keep a note of what you tried, so the next step starts where the last one stopped.

Coach recommends

Two polarities, one sure charge

FitCloudPro Magnetic Charging Cable
Best when polarity is a gamble FitCloudPro Magnetic Charging Cable

Two 2.8mm cables wired in opposite polarity, so at least one charges a FitCloudPro watch on the first try. Short-circuit, over-voltage and over-current protection are built into both.

Strap it on

Stretch battery life past a week

FitPro smart watch battery life starts with the cell: makers of the best-selling calling watches quote 5 to 7 days of normal use from a 350mAh cell, with up to 30 days on standby. Where your own watch lands in that range depends on how you use it, and a few settings decide most of it.

  • Bluetooth calls: the speaker and microphone draw more than anything else on the watch, so daily calls noticeably shorten runtime.
  • 24-hour heart rate: constant readings use more power than spot checks; Da Fit on the Trendia TG09L, for one, lets you switch it on or off.
  • Brightness and raise-to-wake: a bright screen that lights on every wrist turn drains faster.
  • Notifications: every buzz lights the screen, so mute chatty group chats in the app.
  • Watch faces: busy photo faces keep more pixels lit than a simple digital one.

Battery size sets the ceiling. The LIGE EF13's 1400mAh cell is rated for over 19 days of normal use and 65 days of standby, while the 1000mAh SWGOTA claims about 30 days of use.

Standby figures assume the watch sits idle with most features off. Plan workouts and trips around the normal-use number instead.

Top up before the battery falls below about 20 percent where you can; lithium cells age more slowly when they are not run flat every time. That habit also protects the clock, since a fully drained watch often loses its time until it syncs again.

A weekly check-in helps: note the percentage every Sunday evening and see which habit costs the most.

On the scoreboard

Days of normal use per charge

Upper end of each maker's stated normal-use battery life. Calls, a bright screen and 24-hour heart rate shorten it.

Plan for battery replacement and charging on the road

The battery in these watches is sealed under a glued or pressed back to keep water out. Opening the case to swap a cell usually ends its IP67 or IP68 rating, so a worn battery is the signal to retire the watch rather than repair it.

Signs the battery is near the end:

  • A full charge now lasts a day or two instead of a week.
  • The percentage drops sharply during a workout or a call.
  • The back of the case bulges or the screen lifts; stop charging it at once.

For travel, a spare cable weighs almost nothing and saves a week of broken step streaks. Pack one in the gym bag and one in the car.

Charging without the original charger

  1. Borrow any 2-pin magnetic cable with the same pitch; the brand does not matter.
  2. Plug a USB-plug band straight into a laptop, TV or power bank port.
  3. Take a power bank on long hikes; a watch draws so little that a small bank refills it many times.
Never bridge the contacts with bare wires or a coin-cell trick. The charging circuit expects a regulated 5V USB supply, and anything else puts the battery at risk.

See what spares cost in the watch and charger price ranges, and keep the power-off and reset basics handy for switching the watch off before storing it.

Warm-up questions

Asked before the first workout

Which FitPro smart watch charger type do I need?

Most use a magnetic 2-pin USB cable; a few slim bands have a USB plug built into the body. The gap between the pins, commonly 2.84mm or 4mm, decides which cable fits.

Why is my FitPro smart watch not charging?

Sweat film on the two contacts is the usual cause, so clean them with a cotton bud and a drop of isopropyl alcohol. Then try a wall adapter, flip the magnets if the cable allows it, and test a second cable of the same pin gap.

How long does a FitPro smart watch take to charge?

About 1.5 to 2.5 hours for a typical 230 to 350mAh watch, going by makers' figures. Big 1000mAh batteries take up to about 3.5 hours.

Can I use a phone charger?

Yes, with the watch cable plugged into the phone charger's USB port. A standard 5V USB-A port or adapter is all the watch needs.

Is FitPro smart watch battery replacement possible?

The battery is sealed inside a water-resistant case, and opening it usually ends the water rating. When a watch no longer lasts a day, replacing the watch is the practical fix.

How do I charge it without the original charger?

Use any 2-pin magnetic cable with the same pin pitch, or plug a USB-plug band straight into a laptop or power bank. Never press bare wires against the contacts.

Next habit

Keep the streak going

More on the rack

Spare cables and plug-in bands